300-800mm extension
Chassis Extensions
Do you want your dual cab ute to have a larger tray or get more junk in your space cab tray? Then a chassis extension, often called a stretched chassis is the way to go.
We can stretch any ute chassis to fit the right sized tray for your needs. Click on the options below to find out more about each option but always remember your possibilities are Limitless so give us a call to find out what we can do for you.
FROM (AUD)
$6,000
Same size as the Americans
2000 - 2400mm trays
Fully engineered
1 week turnaround possible
300mm Extension suits 1900-2000mm tray
From $6,000 AUD
Info
This has so many advantages that we’ll only list a few: Firstly; it looks amazing, more balanced in proportion like an American Ram or F-truck, you can get more in the back with the extended tray, you can put more tools or junk in the back! It increases the re-sale value, most stretched dual cabs easily return 80% of the cost of the extension when sold privately. You can also fit any standard space/king cab table top tray onto this chassis, as you end up with 300-350 more usable chassis. Take a look at our stretched Ford Ranger, we can do whatever make/model ute you have.
What’s included
- Extended chassis
- Extended tail shaft and all electrics/plumbing etc
- Engineered in all states and territories
Any extras?
- The tray or tub – the options here are limitless so we don’t include the tray in the base cost, just let us know what you’d like and we’ll quote you specifically. Tubs start from $800 and ute trays from as little as $3,500.
Recommended extras
- Chassis strengthening plates so you can load the tray up without worrying.
- Have you already got a lift? If not ask us about the options available to you
- GVM upgrade – take a look at our GVM upgrade options
What else?
As every vehicle we make is custom made we can carry out any work that you require, so if you would like us to fit a lift kit, add some spotties, make a custom tray or even an external roll cage for the ultimate look then just ask and we will provide.
450mm Extension suits 2100mm tray
From $6,500 AUD
Info
You can squeeze a 2000mm tray on the 300mm chassis stretch which we offer, however to get the wheels under the center of the tray you need a bit more. 450mm is the perfect length to get the weight balance right for a 2100mm tray, it gives a much better departure angle as there is less rear overhang (when coming down a 4wd track) and still retains all the drive-ability of a standard ute. We can tailor this size to exactly what you require as each ute has a custom chassis extension made from custom chassis rails. Take a look at our 450mm stretched Nissan Navara chassis with a 2250mm tray, we can do whatever make/model ute you would like.
Tradie chassis extensions with aluminum trays start from as little as $9,000 and you can add as little or as much as you like to your custom tradie package.
What’s included
- Extended chassis with extra support rail
- Extended tail shaft and all electrics/plumbing etc
- Engineered in all states and territories
Any extras?
- The tray – the options here are limitless so here are a few options but we’re not limited by anything so let us know what you’d like and we’ll make it happen!
- Lightweight – heavy duty aluminium trays
- Custom made aluminium/steel trays
- Under tray lockers, toolboxes or draws
- High sides, extra tie-down points, colour coding
- Anything that will make your ute the perfect work vehicle for you!
Recommended extras
You can add anything you like to the vehicle while we’re cutting the chassis
- Have you already got a lift? If not ask us about the options available to you
- GVM upgrade – take a look at our GVM upgrade options
- Bullbars, spotties, winches, rock sliders, you suggest it and we’ll make it happen
What else?
As every vehicle we make is custom made we can carry out any work that you require, so if you would like us to fit a lift kit, add some spotties, make a custom tray or even an external roll cage for the ultimate look then just ask and we will provide.
600mm Extension
From $7,000 AUD
Info
So you want a full sized single cab canopy on a dual cab or space cab body? Not a problem, we can build this 600mm stretched chassis for you. The single cab tray of 2400mm requires the dual cab chassis to be extended by 600mm to accommodate it. It makes for a large ute but the practicality is awesome! The extended Ranger chassis shown here is on a free-style cab with a 2,700mm tray to carry a Polaris buggy!
We can then fit a standard alloy tray or build a full custom version as shown. This one even has an electric pump on the water tank to wash the Polaris down after a beach run.
What’s included
- Extended chassis with extra support rail
- Extended tail shaft and all electrics/plumbing etc
- Engineered in all states and territories
- Full custom trays for the 600mm extensions avaiable
Any extras?
- The tray – the options here are limitless so here are a few options but we’re not limited by anything so let us know what you’d like and we’ll make it happen!
- Lightweight – heavy duty aluminium trays
- Custom made aluminium/steel trays
- Under tray lockers, toolboxes or draws
- High sides, extra tie-down points, colour coding
- Anything that will make your ute the perfect touring vehicle for you!
Recommended extras
You can add anything you like to the vehicle while we’re cutting the chassis
- Have you already got a lift? If not ask us about the options available to you
- GVM upgrade – take a look at our GVM upgrade options
- Bullbars, spotties, winches, rock sliders, you suggest it and we’ll make it happen
What else?
As every vehicle we make is custom made we can carry out any work that you require, so if you would like us to fit a lift kit, add some spotties, make a custom tray or even an external roll cage for the ultimate look then just ask and we will provide.